'>Hextor_1.BSx
'==============================================================
'{$stamp BS2Sx}
'==============================================================
'Introduction to controlling the LEDs.

'Required knowledge:-
'con, output, high, low, pause, toggle, goto 
'==============================================================
'The program is very simple,
'We first of all declare the two constants, 
'Rled (Right LED) and Lled (Left LED)
'then set the pins to OUTPUT and make one HIGH the other LOW
'The initial setting of the LEDs and the PAUSE time can be as
'you like.
'==============================================================
Rled	con	8	'pin, high turns on right green led
Lled	con	9	'pin, high turns on left red led

init:	output Rled
	output Lled
	high Rled
	low Lled

start:toggle Rled
	pause 500
	toggle Lled
	pause 500
	goto start	
'------------------------ end program -------------------------